|
2 Replies and 3426 Views
Simple LED-light
3426 2 - Started by Andreas Lundqvist, last post from Lars Wernlund
Hi I need christmas-tree lights!Is it possible to make a generic LED-pixel with 360 degree spread And can it light up without affecting other objects (so that hundreds of fixtures wouldn&180;t have to be raytraced all the time)ThanksViktor
|
|
|
3 Replies and 3746 Views
3 way color mix.
3746 3 - Started by Mike M, last post from Lars Wernlund
I have an issue with any fixture with color mixing.
I use Hog3PC with Saturation and Hue, with Saturation at 100, when I scroll through the Hues and it gets to the blues, the fixture goes full black.
This happens with CMY and RGB fixtures.
As a fix I normally reduce the saturation to around 60, and then I can go the full circle of hues without it going to black.
Regards
Mike!
|
|
|
2 Replies and 3906 Views
ArtNet problems on OS X
3906 2 - Started by Lauri Sirén, last post from Lauri Sirén
I am trying to connect a Chamsys MagicQ PC (running on windows) to Capture on a Mac. However I can&180;t see any external universes on Capture.
Windows is sending ArtNet, the machines do talk to each other (OS X receives ArtNet too), and I have selected the correct interface on Capture. I just don&180;t see any external universes regardless of which computer or program I start first. They worked fine before updating Capture to 2.1.14.
Is anyone else having this problem
-Lauri
|
|
|
2 Replies and 3551 Views
ACN Support?
3551 2 - Started by Landy, last post from Landy
Does Capture support ACN input
If not, consider it a feature request!
-Landy
|
|
|
6 Replies and 8129 Views
PDF Printing change collors
8129 6 - Started by koenv, last post from Lars Wernlund
Hi capture,
I want to sends some plots with mail. But when i make a PDF the collors are different.
I use the PDF maker from adobe and a free PDF maker: PDFCreator.
Readingskoenv
|
|
|
3 Replies and 4175 Views
New Problem on LT Light edition
4175 3 - Started by yegamusica, last post from Vangelis Manolis
Hello,
In first, i would like to says cheers! for the developement i have seen in the last newsletter. If the profiles will have shutters, it will be very helpfull!!
So now i would like to tell you that i have tested the Capture Polar version 1.19 LT LIGHT edition and it seems that the 'inverse pan' or 'inverse Tilt' don't works.
I have tried to change patch and save and other things but nothing happened, so i can't work on my show.
The fixtures was Smart MAC ( i have see that the gobo 'p...
|
|
|
3 Replies and 4000 Views
more issues with Capture on Mac OSx
4000 3 - Started by Florian Baeumler, last post from Justin.P
Hi,
I thought I might as well open a second threat, because the issues are not just related to Capture crashing. Whilst working on my first project completely relaying on Capture I came across the following problems:
Resetting universes levels renames universes to usage label.Typing 'S' or 's' in any label box will trigger save dialogue.Typing 'O' or 'o' in label boxes triggers close dialogue.
The Courser doesn't change back to pointer after labelling. I need to change
view in any view to ...
|
|
|
1 Replies and 2974 Views
2.1.7 to HogPC 3 Connectivity.
2974 1 - Started by Mike M, last post from Lars Wernlund
Hello,
I am running the following;
HOG3 PC v3.0.4 (b 2468); and
Capture Polar v2.1.7; on
Windows XP SP2
When loading these two applications, running on the same PC, the Hog3 Connectivity application does not load.
I have had the same issue for the past few months.
I have re-installed windows over the top (without formatting), removed the contents of the Hog3 & Capture folders and reinstalled, I had the same issue.
I have since then, formatted and reinstalled windows, and...
|
|
|
4 Replies and 4745 Views
Capture 2.1.7 repeat crash on OS X 10.5.7
4745 4 - Started by Florian Baeumler, last post from Lars Wernlund
Hi,
Capture crashes about every 4-5 min on my MacBook Pro running OS X 10.5.7. I tried running it with the on board graphic chip as well as the dedicated. No difference.
Here is the last crash report.
On a second note: whilst labeling layers typing 's' brings up the save dialog box. Is that the intended behavior
Kind regards
Florian
Process: Capture &91486&93
Path: /Applications/Capture Polar 2.1.7.app/Contents/MacOS/Capture
Identifier: com.lewlight.Captu...
|
|
|
5 Replies and 6790 Views
Hog3PC connection?
6790 5 - Started by John, last post from Lars Wernlund
Has anyone gotten the Hog3PC offline editor to connect to Capture Polar I'm using the latest builds of both and reinstalled the Hog3 Connectivity package for good measure.
I think the network connection to the visualizer machine is good (it seems to talk with other apps), but the DP connection emulator never launches.
thanks,
john
|
|