How to change mesurement unit and fixture type - Capture

MrCPaulsen

New Member

Posts: 0

8/14/2017 9:34 AM

Hi!

My capture software is curantly working in feet and inches. How can I cahnge this to meters and cm?

Also, is it a way to swop fixture types? Say that I have 6 Clay Paky B-eyes in a truss and want to replace them with 6 Martin Aura.

Thanks for the suport:)

John S Nichter

Advanced Member

Posts: 147

8/14/2017 3:33 PM

Hi MrC!

1) To change from imperial measurements to metric, go to Tools from the pull-down menu, then Options. With The General tab selected, you'll see Measurements in the second row. Double-click on Imperial which give you to option to change to Metric.

2) To swap fixtures; have your Clay Paky B-eyes selected, and drag and drop the Martin Aura fixtures, from the fixture library onto your selected Clay Paky B eyes. This will update to the new fixture in your show. Be sure to check the Martin address assignments for possible DMX address overlap.

Hope this helps!

Best,
Johnny

John S Nichter

Advanced Member

Posts: 147

8/17/2017 5:01 PM

Have a look at page 29 of the 23.0 Revision C manual for fixture swapping.

Forum