The new Led Tape feature is great. But can we increase the limits please. Will better reflect what is commercially available.
Width down to 0.5mm from 5mm min.
Pixel pitch up to 100mm. from max of 25mm
Also for the total length to manually to be entered instead of dragging to length.
This is an incredible small strip! Nice!
Just to be sure, with 6 pixels in 100mm, the pixel pitch should be 16,6mm, am I right?
100mm would be the pitch for this type of tape (not possible at present) As in the space between pixels. It would present itself as one block as they are not individually addresable. As in 10 pixels or blocks for 1m So those six pixels count as 1.
So for example, 1m or 1000mm length of LED tape at a pitch of 25mm would give you pixel count of 40.
16.6 would give you 60 pixels.
Totally agree. 24V 60px/m LED strip usually uses 3 or 6 physical LEDs by pixel, so you have a big 100mm pixel. Sometimes you need to bin LEDs as a pixel configured in controller, so lighting desk doesn't see real pixels, only binned ones.
A great improvement could be the addition of space between LEDs and/or pixels to simulate better this behaviour, in addition to adding diffusers or simulate thick or profile forms.
Regards