Hi everyone,
I’m encountering an issue with Capture 2025 (latest version).
I was previously using an external console to control my fixtures in the 3D view. After disconnecting the console, I am unable to control my fixtures manually within the software. The Pan, Tilt, and Dimmer parameters do not respond anymore when I try to adjust them directly in the Selection tab.
It seems like the DMX data from the console is still "overriding" or locking the manual controls, even though the console is no longer connected.
How can I "release" the DMX control or reset the fixtures so I can use the manual Design tools again?
Thanks for your help!
In the project window click:
universes / more / reset levels.
this also works if you have fixtures that are on, but they aren't selected or you just don't know why they are still on - it just rests everything to 0.
cheers
rabbit
Good evening, thanks for your reply. Unfortunately, it’s not working; I’ve already tried that several times without any luck. I feel like I have to overwrite my file and start all over again... sigh Thanks again! ====================================================================================
I finally found a solution: I created a new blank file and re-imported the corrupted one into it. Now, everything is working perfectly again.
I think there is a serious bug regarding this issue. It’s 'solved' without really being fixed; the administrators should definitely look into it.
Best regards