Capture supports a wide range of network protocols and methods of communication with lighting consoles. The full list can be found in the reference manual. We generally recommend using the Art-Net or sACN ethernet DMX protocols.
On this page we have gathered any information specific for a particular console manufacturer brand or console model.
Please refer to the documentation from each console manufacturer on how to configure Art-Net or sACN output.
Expand or collapse any category below by clicking on it.
= Ok with restrictions
Covered in our Capture Live: Avolites Titan Special webcast.
CITP - blind DMX, DMX feedback, live view images, cue recording, selection synchronization & patch synchronization
Last tested with Titan 11.0.
Last tested with Vista3 R1 build 19088.
Last tested with Eos 2.7.3 Build 10.
Hog connectivity driver covered in the first half of our Capture Live: High End Hog 4 and ChamSys MagicQ Special webcast.
CITP - 16+ DMX universes
Hog connectivity driver - Windows only and not in presentation files: 16+ DMX universes, DMX feedback, selection from Capture
Art-Net and sACN output requires High End Systems hardware to be present.
Last tested with Hog 4 v3.12.0.
Art-Net - does not support the StVisual style code. Set up additional devices on the same IP address manually to output more than 4 universes to Capture.
CITP - output video streaming
Last tested with MADRIX 5.1a.
Last tested with Clarity 2.3.3.
Art-Net is hardwired to the 220.127.116.11/24 or 10.0.0.0/24 networks. Ensure that your network interface is configured with an IP address for one of these networks.
Art-Net does not support the StVisual style code. Use the Broadcast or Unicast modes and manually configure the number of universes you need in Capture.
MA-Net - Windows only and not in presentation files
Only the same amount of DMX universes otherwise output by your connected MA Lighting hardware (through DMX ports or other network protocols like Art-Net) can be utilized in Capture. Therefore you cannot receive DMX from grandMA2 onPC unless you have MA hardware connected. Some competing lighting design and visualization softwares on the market support receiving DMX as well as DMX feedback ("autofocus") over MA-Net without the need for MA Lighting hardware. This is possible for historical reasons as they were provided with other drivers than us prior to an MA Lighting policy change. For further information and/or clarifications on this matter, please contact MA Lighting.
Last tested with MA onPC version 18.104.22.168.
Art-Net is hardwired to the 22.214.171.124/24 network. Ensure that your network interface is configured with an IP address for this network.
Art-Net does not support the StVisual style code. Broadcast mode is required in order to transmit more than 4 universes to Capture.
Last tested with Onyx 4.0.1010.0.
CITP - DMX feedback, live view images
Last tested with StageLight 2.7.2.
CITP - DMX feedback, selection synchronisation
Last tested with ZerOS 7.9.4.